Studies on Catalytic Side-Chain Oxidation of Nitroaromatics to Aldehydes with Oxygen

The side-chain oxidation of 2-nitrotoluene in liquid phase in the presence of catalytic amount of manganese sulfate and stoichiometric amount of potassium hydroxide with oxygen was studied. In the most favorable conditions, over 80% of conversion of 2-nitrotoluene and 50% of selectivity to 2-nitrobenzaldehyde was achieved. Effects of the reaction parameters on the conversion of the reactant and the selectivity of the product were examined. These results, together with EPR spectroscopic study, show that a benzyl anion was formed in the early stage of the reaction, which was then converted to the final product via a free radical mechanism.     

氧气液相氧化一元取代甲苯制备芳香醛

研究了在酸碱不同体系下气氛液相氧化对氯甲苯、邻硝基甲苯制取相应芳香醛的反应 ,比较了反应温度、反应时间、氧气流量、底物浓度对各自反应的影响。初步研究了反应在酸碱不同条件下的反应机理 ,认为在醋酸体系下是自由基反应 ,而在有机胺体系下应是碳负离子反应。     

新型2-芳氧基-3H-喹唑啉-4-酮的合成

利用膦亚氨试剂的氮杂Wittig反应在喹唑啉酮的2位导入取代基，制得了9个2-芳氧基喹唑啉酮的新衍生物。探讨了碳二亚胺与不同酚在固体碳酸钾催化下的反应活性。     

Co-Zn复合掺杂纳米氢氧化镍的制备及性能

采用微乳液法合成了Co、Zn复合掺杂的纳米Ni(OH)_2粉体,通过改变温度、pH值对产品堆积密度、比容量的影响, 发现T=50℃、pH=11时,样品电极的性能较好,以50 mA·g~(-1)恒电流充放电,终止电压为1．0V的充放电制度下,其比容量达 282mAh·g~(-1),样品经过50次循环后容衰减率仅为2．5％．     

取代2-四氢萘酮的一步合成新方法研究

本文介绍了一步法制备取代2-四氢萘酮的新方法,与常规合成方法相比,该法具有明显的优点:不需要先将羧酸转化成酰氯,避免了三氯化铝以及含氯溶剂的应用,并使催化剂得以循环利用。因此,该方法安全、环保,有望取代常规的付-克反应在工业上的应用。     

1，3－取代方酸衍生物的光谱研究及二聚体、簇集体的形成

本文合成了１，３－取代方酸衍生物：１，３－双［４－二甲胺苯基］－２，４二羟基环丁二烯氢氧双内盐（ＤＭＣＳ），１，３－双［４－双十六烷胺苯基］－２，４二羟基环丁二烯氢氧双内盐（ＤＨＣＳ）。研究了ＤＭＣＳ和ＤＨＣＳ在不同溶剂中的光物理行为，估算了ＤＭＣＳ、ＤＨＣＳ的基态与激发态之间偶极矩差值。在ＣＴＡＢ胶束中，除ＤＭＣＳ单体分子外，ＤＭＣＳ形成了二聚体。在二氧六环－水体系中，研究了ＤＨＣＳ的簇集行为，并测定了ＤＨＣＳ的临界簇集组成（Ｃ＿ψ）及临界簇集浓度（Ｃ＿Ａ）     

无溶剂CTAB催化制备取代2-氨基-2-色烯

在溴化十六烷基三甲基铵(CTAB)催化及无溶剂条件下,由芳亚甲基丙二腈与1-萘酚或2-萘酚发生加成、环化反应,生成相应的取代2-氨基-2-色烯。     

3-取代苯基-5-羟基-5-三氟甲基异噁唑啉的合成

3 取代苯基 5 羟基 5 三氟甲基异口恶唑啉是合成具有异口恶唑结构的原卟啉原氧化酶抑制剂类除草剂的重要中间体。通过以下途径制得4个具有不同取代基的异口恶唑啉中间体:首先,在回流状态,n(甲醇钠)∶n(取代苯乙酮)=2∶1的甲醇钠存在下,取代苯乙酮与三氟乙酸乙酯缩合得到取代苯基 4,4,4 三氟 1,3 丁二酮;后者可在室温下,于二氯甲烷溶剂中,用氯化硫酰氯化,在侧链上引入氯原子;最后,以乙酸作溶剂,回流下,具有不同取代基的苯基 1,3 丁二酮与盐酸羟胺闭环得到产物。反应总收率大于95%。产品结构经质谱、核磁共振氢谱、碳谱确认正确。     

Copolymerization of phenylacetylene with various acetylenes by W- and Mo-based catalysts

In the copolymerization of phenylacetylene with various acetylenes catalysed by WCl₆·Ph₄Sn, the relative reactivity of monomer decreased with increasing steric effect of monomer, e.g. HC  Cn-Bu, HC  Cn-Hex > HC  CPh, HC  Cs-Bu > HC  Ct-Bu, MeCCPh, CICCPh. While 1-chloro-2-phenylacetylene (a disubstituted acetylene) showed high reactivity in the homopolymerization by Mobased catalysts, the reactivity was remarkably depressed in the presence of phenylacetylene as comonomer. Based on these results, the relative reactivity of the acetylenic monomers in copolymerization was explained in terms of competitive coordination of monomers to the propagating end.     

Synthesis,characterization, and thermal behavior study of methyl methacrylate polymers containing 4‐carbazole substitutes

A new polymerizable monomer, [4‐(9‐ethyl)carbazolyl]methyl methacrylate ( 2 ), was synthesized by reacting of methacrylic acid and 4‐hydroxymethyl‐9‐ethyl carbazole ( 1 ) by esterification procedure in the presence of N,N′‐dicyclohexylcarbodiimide. The resulting monomer was then polymerized free‐radically to form the poly(methyl methacrylate) containing 4‐(9‐ethyl)carbazolyl pend ent groups. Also, copolymerization of monomer 2 with various acrylic monomers such as methyl methacrylate, ethyl methacrylate, methyl acrylate, ethyl acrylate, and n‐butyl acrylate by azobisisobutyronitrile as a free radical polymerization initiator gave the related copolymers in high yields. The structure of all the resulted compounds was characterized and confirmed by FTIR and ¹H NMR spectroscopic techniques. The average molecular weight of the obtained polymers was determined by gel permeation chromatography using tetrahydrofurane as the solvent. The thermal gravimetric analysis and differential scanning calorimeter instruments were used for studying of thermal properties of polymers. It was found that, with the incorporation of bulky 4‐(9‐ethyl)carbazolyl substitutes in side chains of methyl methacrylate polymers, thermal stability and glass transition temperature of polymers are increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4989–4995, 2006